inner-bannernews1
5 Natural Ways to Clean Your Frameless Shower Screens in Melbourne

5 Natural Ways to Clean Your Frameless Shower Screens in Melbourne

Shower Screens

5-natural-ways-to-clean-your-frameless-shower-screens-in-melbourne

Nowadays, shower screens are an important bathroom staple for many Australian homeowners. They have become the norm for home décor projects, provided they are durable, flexible and functional. Shower screens look wonderful when they are properly installed. But over time, mineral deposits and soap scum make the glass look dirty and dull. And if you don’t tackle the issue, those deposits can damage your shower screens.

When it comes to cleaning frameless shower screens in Melbourne, most people think about harsh cleaning products like ammonia, disinfectants, sulphuric acids, etc. But these chemicals are not good for the environment and may affect the air quality inside your bathroom. The Department of Environment and Energy’s report states that air quality inside your home often gets five times worse than outside.

The good news is that you can effectively clean a shower screen without using any harmful chemicals. There are some eco-friendly, homemade solutions to tackle the cleaning and maintenance work. Not only do they benefit the environment, but also keep your family healthy while offering a pleasant showering experience.

What household products are great for cleaning shower screens?

Although there are many natural techniques to clean shower screens, the best ones require things you might already have at your home. So, get ready to change your shower cleaning products with some DIY ideas and keep your shower screen sparkling new. Here are some natural cleaning products that are effective against mould and bacteria:

Fabric softener

If you have fabric softener in your laundry room, you can use it to clean your shower screen. Mix fabric softener (1 cup) with warm water (1 litre) and then wipe it on the screen. After 2-3 minutes, rinse it off with the help of dryer sheets or soft cotton. This technique is great for removing soap scums and residue on your screen.

White vinegar

White vinegar is a must-have for homeowners because it offers some great cleaning properties. Not only is it proven to be effective against mould and bacteria, but it also saves you from dangerous chemicals. You can easily spray the vinegar over any glass panel and then brush it with the help of a non-starch sponge. Make sure you rinse it off with some warm water to achieve the best results. Also, don’t forget to put labels on the vinegar bottle for safety purposes.

Salt and lemon juice

If you have a framed shower screen made of metal, then you may notice rust formation after a long time of use. This makes your screen look old and dirty. To remove the rust, make a paste of salt (2 tablespoons) and lemon juice (1 tablespoon). By using a toothbrush, rub the paste over the rust. Let it be there for a few minutes before rinsing it off with warm water. You can also cut a lemon in half and dip it in salt before rubbing it on the screen.

Baking soda

To eliminate tougher stains, head to your store room and grab the baking soda. Use a little warm water to create a thick paste of baking soda and apply it over the glass using a soft toothbrush. Move the brush around screen hinges and framework to remove stubborn stains. Once you are done brushing, rinse the screen with water and then clean it with a paper towel. Make sure you don’t use any coarse brushes or scrubbers as they can scratch the shower screen.

Furniture oil

After all the cleaning work, it’s time to coat the screen with a thin layer of oil. Since furniture oil has some amazing properties, you can easily avoid scum and mould formation by using it. In addition, it will also keep the glass looking spanning new for longer. To achieve the best outcome, it is advisable to choose a glass-friendly furniture oil for coating the shower screen.

How to keep your shower screen clean and shiny?

If you don’t want any mineral deposits and soap scums, listed below are the best ways to easily clean and maintain frameless shower screens. Have a look:

Buy a good-quality squeegee

When water sits on the glass for a longer time, it builds up minerals, including lime scales. To keep the glass clean and shiny, invest in a quality squeegee so that you would be able to remove the water from the screen after every shower. Seriously, cleaning your shower screen won’t be a chore anymore.

Keep your fixtures and fittings polished

For a clean and sparkling shower screen, polish the fixtures and fittings. Keep taps and spindles in a good condition and clean them with, guess what – white vinegar. By mixing it with bicarbonate soda, you can create a useful combination that will help you get rid of built-up lime scales, mould and bacteria. Also, if you want to add a nice fragrance to your shower, consider using a couple of drops of peppermint or tea-tree oil in the bathroom.

Don’t forget to wipe the shower after using it

We’ve all been spending hours scrubbing down every corner of the shower screen, but the easiest way to cut down the cleaning time is by drying your shower regularly. While it may seem hard to develop the habit of cleaning your shower daily, this will save you from several consequences, such as bacteria and mould growth. We recommend you to clean the screen with a super-absorbent cloth or squeegee.

Ending thoughts

Whether the shower screen is covered in hazy grey spots or lime scales, the above-mentioned remedies will eliminate such issues in no time. With the help of some homemade remedies, you can easily clean your shower screen and bring it back to a brand-new condition. Say goodbye to those poisonous cleaning chemicals that irritate you. It’s time to become environment-friendly while cleaning beautiful framed shower screens in Melbourne.

Happy cleaning!

Security Doors
Security Doors & Shower Screens

For Customers All Over Melbourne And Geelong

Latest News
Google Rating
4.5
Based on 22 reviews
×
js_loader